Lantronix X300 Series X300 Series User Guide Rev B - Page 108
Ethernet SMS, Services > SMS > Ethernet SMS
View all Lantronix X300 Series manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
10: Services Name WAN Ping WWAN Ping Start/Stop VPN Command Syntax AT+WANPING= Description: Ping WAN interface Parameter: IPA - IP address of the WAN interface to ping. AT+WWANPING= Description: Ping WWAN interface Parameter: IPA- IP address of the WAN interface to ping. AT+VPN=,, Description: Start or stop the VPN instance Parameters: VPN type - pptp, l2tp, ipsec, openvpn VPN name - VPN instance name Start/stop - action to start or stop the VPN Examples: AT+VPN=ipsec,IPSEC1,start AT+VPN=ipsec,IPSEC1,stop Ethernet SMS Services > SMS > Ethernet SMS This service enables the device connected on LAN to initiate an SMS using Ethernet port. Parameters Enable Port Table 10-17 Ethernet SMS Configuration Description Check to enable the Ethernet SMS. Enter the port number. The port number range is from 0 to 65535. To send an SMS you need to open a TCP client connection on the LAN IP and configured port. Once the connection is created, issue the following commands: To send an SMS AT#SENDSMS=+ To read an incoming SMS AT#READSMS= To delete an SMS AT#DELSMS= The internal SMS buffer is 10 messages - meaning, 11th incoming SMS will be over written on the 1st SMS. X300 Series IoT Cellular Gateway User Guide 108