Lantronix X300 Series X300 Series User Guide Rev B - Page 30
Power Input, Power Consumption, Reset Button, Ground, Ignition, Positive
View all Lantronix X300 Series manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Power Input The power input interface is shown in Figure 2-9. For the power cable schematic, see Power Cable Schematic. Figure 2-9 DC Input Interface 2: Introduction Ground Positive Ignition Power Consumption Table 2-10 X300 Series Power Consumption Device State Input Voltage 10V 12V 24V Idle state (Wi-Fi, WWAN, WWAN6, LAN & 112 mA Cellular off) 93 mA 52 mA LAN connected (Wi-Fi, WWAN, WWAN6, 148 mA & Cellular off) 110 mA 64 mA WWAN connected (Wi-Fi, LAN, WWAN6 113 mA & Cellular off) 95 mA 48 mA WWAN6 connected (Wi-Fi, LAN, WWAN 112 mA & Cellular off) 96 mA 48 mA Wi-Fi on (WWAN, WWAN6, LAN, & Cellular off) 162 mA 138 mA 70 mA WWAN, WWAN6, LAN connected, Wi-Fi 174 mA on, (Cellular standby) 144 mA 74 mA Cellular connected (Wi-Fi, LAN, WWAN & 164 mA WWAN6 off) 144 mA 77 mA WWAN, WWAN6, LAN connected, Wi-Fi 204 mA on, Cellular connected 159 mA 83 mA 30V 41 mA 48 mA 40 mA 42 mA 58 mA 60 mA 54 mA 74 mA Reset Button Using a paper clip or similar object to poke through the RESET hole, press the recessed Reset button as shown in Figure 2-2. To reboot the unit, press and hold the reset button for more than 1 second and less than 5 seconds. To reset to factory settings, press and hold the reset button for more than 5 seconds and less than 20 seconds. X300 Series IoT Cellular Gateway User Guide 30