Lantronix X300 Series X300 Series User Guide Rev B - Page 46

6: Quick Setup Quick Setup lets you configure the IP network port so that you can configure other gateway settings. To bypass quick setup and directly configure the network interfaces using advanced settings, go to the Network page (see Chapter 11: Network). Quick Setup Quick Setup > Quick Setup To configure the network settings: 1. On the Quick Setup page, enter the network and basic configuration of the gateway. See Table 6-1. Table 6-1 Quick Setup Network Configuration Parameters Local Area Network (LAN) Description IPv4-Address Enter an IPv4 address for the LAN interface. This is the IP Address that must be used to access the gateway. The default LAN IPv4 Address is 192.168.1.1. IPv4-Netmask Enter the IPv4 netmask of the LAN interface. The default netmask is 255.255.255.0 Cellular General Settings Embedded SIM Settings (tab) Use Custom APN Select which SIM to use, embedded or external SIM. Select this option to use a custom Access Point Name (APN) for the cellular network data connection. APN Displays the APN or custom APN for the connection. Enable roaming External SIM Settings (tab) Displays as Enabled if data roaming is enabled, or disabled otherwise. Use Custom APN Select this option to use a custom Access Point Name (APN) for the cellular network data connection. APN PIN Enter the APN used for the cellular data connection. SIM card Personal Identification Number (PIN) is used to lock the card, preventing people from making unauthorized phone call or accessing cellular data services. Enter the PIN of the SIM card. Authentication Type The authentication method used for the cellular connection. If PAP, PAP/CHAP, or CHAP are selected, enter the username and password. Username Password ConsoleFlow Client Enter the PAP/CHAP username. Enter the PAP/CHAP password. X300 Series IoT Cellular Gateway User Guide 46