Lantronix X300 Series X300 Series User Guide Rev B - Page 130
Protocol Descriptions, Static Address
View all Lantronix X300 Series manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
11: Network Protocol Descriptions Static Address Table 11-4 describes the Static Address protocol settings. Table 11-4 Static Address Protocol Settings Parameters Description General Settings Protocol Bring up on boot Static Address - Static configuration with fixed address and netmask Allows the interface to be live after every reboot. Bring up on boot is checked by default. IPv4 Address Enter the IPv4 Address. This IP Address must be used to access the gateway. The default LAN IP Address is 198.162.1.1. IPv4 Netmask Select the IPv4 Netmask. IPv4 Gateway IPv4 broadcast Use Custom DNS servers Enter the IPv4 address for gateway. Enter the IPv4 address for broadcast. Enter the IP address of the custom DNS server. Click the + button to add more DNS servers. IPv6 assignment length Select the IPv6 assignment length. Available Options 64 or 60 - Assign a part of the given length of public IPv6-prefix to this interface. disabled - do not assign part of the prefix to this interface --custom-- - Assign a part of the given length of public IPv6-prefix to this interface. IPv6 assignment length is disabled by default. If assignment length is disabled, enter the following: IPv6 address - Enter the IPv6 Address. IPv6 gateway - Enter the IPv6 Address for Gateway. IPv6 routed prefix - Enter the public prefix to direct the client distribution to the gateway. If assignment length is 60, 64, or custom, enter the following: IPv6 assignment hint -Enter hexacimal subprefix ID for this instance to assign prefix parts. IPv6 suffix - Enter the IPv6 suffix. Advanced Settings Use builtin IPv6 -management Force link Allows to use the built in IPv6 management configuration. Select this option to assign interface properties regardless of the link being active or not. If not selected, items are assigned only after the link has become active. Default is not selected. Override MAC address Click to override the default MAC Address for the WAN Interface. On factory reset, it will be set to default MAC address. X300 Series IoT Cellular Gateway User Guide 130