Lantronix X300 Series X300 Series User Guide Rev B - Page 128

Parameters Actions Add new interface Global Network Options IPv6 ULA-Prefix Network Watchdog Enable Time Interface Status 11: Network Description Select the action to be taken for the interface.  Restart - Connects the interface or reconnects the already started interface.  Stop - Stops the interface.  Edit - Allows you to edit the interface settings.  Delete - Deletes the interface. Note: Default interfaces have predefined configurations and should not be deleted. Click Add new interface to add a virtual interface. See Add Virtual Interface. Displays the IPv6 Unique Local Address (ULA)-Prefix Select this box to enable or clear the box to disable the network watchdog. The network watchdog monitors the connectivity of all WAN (external network) interfaces. In the absence of connectivity resulting in Network down, the gateway resets itself. By default, the network watchdog is in enabled mode. If the network watchdog is enabled, enter the watchdog timeout in minutes. Figure 11-2 WAN Interface Status Parameters Protocol Uptime MAC Address RX TX IPv4 IPv6 Table 11-2 Wireless Overview and Associated Stations Description Protocol assigned to the interface Amount of time that the interface has been active since the last reconnection. MAC address of the physical interface. Note: MAC address is displayed for LAN, WAN, WWAN, and OpenVPN interfaces. Number of received bytes over the interface for the current session. Number of transmitted bytes over the interface for the current session. IPv4 address IPv6 address X300 Series IoT Cellular Gateway User Guide 128