Lantronix X300 Series X300 Series User Guide Rev B - Page 151

11: Network Parameters Priority BSSID Network Hide ESSID Wireless Security Encryption Cipher Key Enable key reinstallation (KRACK) countermeasures MAC-Address Filter MAC-Address Filter Description The order of preference in which the gateway will attempt to join the configured wireless networks. The range is from 1 to 8 with 1 being the highest priority and 8 being the lowest priority. This field is displayed for Client only. Basic Service Set Identifier (BSSID) - 48-bit MAC address for the access point of the BSS. This can be left blank. Select LAN for the Access Point or WWAN for Client Mode to configure the gateway as LAN or WWAN respectively. Select Hide ESSID, to hide ESSID when client machines scan for available Wi-Fi networks. Select the Encryption mode for Wi-Fi network. Available Options:  WPA3 Transition Mode (strong security)  WPA2-EAP (strong security)  WPA3 SAE (strong security)  WPA2-PSK/WPA-PSK Mixed mode (medium security)  WPA-PSK (medium security)  WPA-EAP (medium security)  Open (no security) The default encryption mode for access point configuration is WPA2PSK/WPA-PSK Mixed mode. WPA3 only applies to the STA (client) interface For all encryption modes except No Encryption. Select the cipher suitable to the gateway. Options:  Auto  Force CCMP (AES)  Force TKIP  Force TKIP and CCMP (AES) The default cipher is auto mode. Enter the key respective to cipher type This setting is displayed only if the interface is an Access Point. Select to enable KRACK countermeasures. This setting is disabled by default. Allows or blocks certain client MAC Addresses. Default is disabled. This setting applies only to Access point mode. Options:  Disable  Allow listed only - If this option is selected, choose the client MAC Addresses to allow.  Allow all except listed - If this option is selected, choose the client MAC Addresses to block. X300 Series IoT Cellular Gateway User Guide 151