Netgear PS110 PS110 Reference Manual - Page 116
Assigning an IP Address to the Print Server Using DHCP
UPC - 606449002218
View all Netgear PS110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Installation and Reference for the Model PS104/PS105/PS110 Print Server • Includes only UNIX systems or if you have PCs without Windows on your network You must configure both your print server and all your PC systems with the instructions provided in this chapter. Before you can configure the print server (which must be done first) you must assign an IP address to it. (For information about IP addresses, refer to Appendix B, "Understanding IP Addresses.") Use one of the following two methods: - Assign active IP address resolution With temporary IP address assignment, the print server sends out broadcast packets actively searching for a server to provide the print server with an IP address. The print server sends out DHCP packets, BootP packets, and RARP packets (in this sequence) to resolve its own IP address. This broadcast mechanism is conducted only upon reset or power cycle. Assign a temporary IP address to your print server by referring to: • "Assigning an IP Address to the Print Server Using DHCP" as outlined on page 6-3 • "Assigning an IP Address to the Print Server Using BootP" as outlined on page 6-3. • "Assigning an IP Address to the Print Server Using RARP" as outlined on page 6-4. - Assign passive IP address resolution Assign a static IP address to your print server by referring to "Assigning an IP Address to the Print Server Using ARP" on page 6-6. With all four methods of IP address resolution, the print server loses the IP setting after reset or a power loss. To permanently configure the print server and save the IP address assignment in the flash EEPROM of the print server, you must use FTP. Using FTP, you can modify the CONFIG file in the print server. After you configure the print server as described in "Configuring Your Print Server Using FTP" on page 6-7, choose a printing method as described in "Setting the Print Method" on page 6-9 to configure each UNIX PC in your network. 6-2 UNIX Printing Using TCP/IP