Netgear PS110 PS110 Reference Manual - Page 151
NetWare Remote Printer (RPRINTER) Mode, Attaching to More Than One NetWare Print Server,
UPC - 606449002218
View all Netgear PS110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
Installation and Reference for the Model PS104/PS105/PS110 Print Server NetWare Remote Printer (RPRINTER) Mode In the NetWare RPRINTER mode, QUICKSET uses these settings: • Ethernet 802.2 frame type Set to Enable • Ethernet 802.3 frame type Set to Enable • Ethernet SNAP frame type Set to Enable • Ethernet II frame type: Enable • Set attached NetWare Print Server as the specified server • Set NetWare Operation Mode: Remote Printer Mode • Set the print server name as specified in the parameter list The QUICKSET program configures all of the printer ports on the printer to service the same NetWare print server. If you want to configure the printer ports to service different NetWare print servers, refer to "Attaching to More Than One NetWare Print Server" on page 5-21. In the Novell RPRINTER mode, use these QUICKSET commands: • For Binary-based file server QUICKSET Name R (UN=P) (/Q1=W) (/Q2=X) (/FS=F) • For NDS Network QUICKSET Name R (/UN=P) (/Q1=W) (/Q2=X) Using Advanced Management Tools 7-23