Netgear PS110 PS110 Reference Manual - Page 173
Appendix E IP Setup, Overview
UPC - 606449002218
View all Netgear PS110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 173 highlights
Appendix E IP Setup This appendix provides a brief overview of IP addressing. Overview This appendix is intended only when the user has inadvertently disabled the DHCP protocol and/or assigned a wrong subnet IP address. Refer to Table E-1 to assign a static IP address. Table E-1 describes each setting. Table E-1. IP Configuration Settings Setting Device Name Device IP Address Gateway IP Address Subnet Mask Recommended Value Shown on a sticker on the base of the device in the form "PSxxxxxx." 192.168.0.1 0.0.0.0 0.0.0.0. Clicking on Reset will set all values back to zero, and clicking on OK sets the data entered. Ensure that the IP address assigned to the device is not already in use. IP Setup E-1
IP Setup
E-1
Appendix E
IP Setup
This appendix provides a brief overview of IP addressing.
Overview
This appendix is intended only when the user has inadvertently disabled the DHCP protocol and/or
assigned a wrong subnet IP address. Refer to
Table E-1
to assign a static IP address.
Table E-1
describes each setting.
Clicking on Reset will set all values back to zero, and clicking on OK sets the data entered.
Ensure that the IP address assigned to the device is not already in use.
Table E-1.
IP Configuration Settings
Setting
Recommended Value
Device Name
Shown on a sticker on the base of the device in the form
"PSxxxxxx."
Device IP Address
192.168.0.1
Gateway IP Address
0.0.0.0
Subnet Mask
0.0.0.0.