TASCAM SS-R200 100 SS-R200 SS-CDR200 Owners Manual - Page 31

4 − Preparations ENTER: resumes playback or playback standby according to the status before locating PLAY: starts playback READY: enters playback standby NOTE • If you enter only the track number and press the ENTER, PLAY or READY button, the result is the same as described in "Specifying a track number" (page 31). • You can also enter the numbers using a keyboard number pad. Jog playback In jog playback mode, you can use the MULTI JOG dial on the main unit to search by one frame at a time. 1 While pressing and holding the SHIFT button, press the MENU [JOG] button to enable jog playback mode. The PLAY and READY buttons flash, and the track elapsed time in the TRACK mode display on the Home Screen shows the frame value. Frame value 2 Turn the MULTI JOG dial to search. 3 To exit jog playback mode, press the STOP, PLAY or READY [CALL] button. The unit responds to the button pressed, stopping, playing back from or pausing at the searched position, accordingly. NOTE If the Home Screen display is in any mode other than TRACK mode, when using jog playback mode, the frame value will not be shown in the track elapsed time. Press the HOME/DISPLAY button (or remote control HOME/ DISP button) to change to TRACK mode before starting jog playback mode. Skipping backward and forward During playback and playback standby, you can skip backward of forward from the current position by the preset skip time. During playback or when in playback standby, press the m [SKIP] or , [LOCK] button (or remote control SEARCH m/, buttons) to locate backward or forward from the current position by the SKIP TIME. After locating, the previous state resumes. NOTE • If the time from the beginning of the track is less than the skip time when you press the m [SKIP] button (or remote control SEARCH m button), the unit will locate to the beginning of the current track. • If the time from the beginning of the track is less than 1 second when you press the m [SKIP] button (or remote control SEARCH m button), the unit will locate to the position that is the skip time before the end in the previous track. However, if it is the first track of the current device media or program, playback standby will occur at the beginning of the current track. • In random playback mode, if you press the m [SKIP] button (or remote control SEARCH m button) when the time from the beginning of the track is less than the skip time, the unit will always locate to the beginning of the current track. • If the track remaining time is less than the skip time when you press the , [LOCK] button (or remote control SEARCH , button), the unit will locate to the beginning of the next track. However, if it is the last track of the current device media or program, playback standby will occur at the end of the current track. Setting the skip time 1 While pressing and holding the SHIFT button, press the m [SKIP] button to open a pop-up window where you can set the skip time. 2 Turn the MULTI JOG dial (or press the remote control 5 and b buttons) to set the skip time. Setting values: 1 sec - 60 sec (default value) 3 Press the MULTI JOG dial (or remote control ENTER button) to confirm setting values and return to the Home Screen. Call function The call function returns to the call point (point from where playback last started from playback standby) and puts the unit in playback standby When in playback standby, press the READY [CALL] button (or remote control CALL button) to return to the point from where playback last started and start playback standby. TASCAM SS-CDR200/SS-R200/SS-R100 31