TASCAM SS-R200 100 SS-R200 SS-CDR200 Owners Manual - Page 33

4 − Preparations Setting the pitch step You can change the pitch step (amount of pitch adjustment). The pitch step is the amount of pitch change produced by turning the PITCH knob one step or by pressing the Remote's PITCH +/- button once. 1 Press and hold the PITCH knob (or remote control PITCH button) to open the -PITCH STEP- and X.X% pop-up on the Home Screen. 2 While the PITCH STEP pop-up is shown, turn the MULTI JOG dial to set the pitch step. Setting range: 0.1% (default value) - 1.0% 3 After making the setting, push the PITCH knob (or remote control PITCH button) to return to the Home Screen. NOTE The pitch step setting is retained even after the power is turned OFF. Key control playback Using the key control function, you can change the playback key (pitch in semitones). Follow these procedures in menu mode to turn key control ON/OFF and set the key level. 1 While pressing and holding the SHIFT button, press the PITCH knob (or press the remote control KEY button) to turn the key control function ON. When ON, the indicator appears on the Home Screen. NOTE • When using the key control function, the playback may sound irregular. This is due to the special processing being applied to the playback signal, and is not a malfunction. • The key control KEY LEVEL setting is retained even after the power is turned OFF. TIP If you turn on both the key control and pitch control functions, the key (pitch) will be determined by the key control setting and the speed will be determined by the pitch control setting. (In other words, using pitch control to change the speed will not affect the pitch of the sound). Thus, if you set KEY LEVEL to 0 and turn key control ON, you can use pitch control to change the playback speed without affecting the pitch. Repeat playback You can repeatedly play back all tracks in the play area, or repeatedly play back a specified region within a track (A-B Repeat playback). Ordinary repeat playback When the repeat playback function is ON, the following will occur according to the playback mode. • CONTINUE: the entire play area will be played back repeatedly • SINGLE: the current track will be played back repeatedly • PROGRAM: the entire program will be played back repeatedly • RANDOM: the entire play area will be played back at random To turn the repeat playback function ON, follow one of these procedures. 2 While pressing and holding the SHIFT button, turn the PITCH knob (or press the remote control KEY - and + buttons) to set the KEY LEVEL. While adjusting the KEY LEVEL, it is shown in a pop-up on the Home Screen. You can set the KEY LEVEL in a range from ¢6-¢1, 0 (no pitch change), #1-#6. TASCAM SS-CDR200/SS-R200/SS-R100 33