TASCAM SS-R200 100 SS-R200 SS-CDR200 Owners Manual - Page 63
Copying files between CDs and other media (SS-CDR200), Copy/convert and copy files from USB/SD/
View all TASCAM SS-R200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
10 - Copying files between CDs and other media (SS-CDR200) You can copy (or convert and copy) files on USB/SD/CF media to a blank CD. You can also copy (or convert and copy) files on a CD to USB/SD/CF media. Copying is only possible from the CD menu, so set the current device to CD. Before conducting the following operations, load appropriate CD and USB/SD/CF media in the unit. NOTE You cannot copy to a write-protected SD card. (See "SD card write-protection" on page 26.) Copy/convert and copy files from USB/ SD/CF media to blank CDs When copying MP3 or WAV files from USB/SD/CF media to a blank CD, you can copy the files in the same file format to make a data CD or convert the files into audio CD format when copying. If you select audio CD format, MP3 and WAV files on USB/ SD/CF media will be converted to audio CD format and copied to a blank CD. If you use an unfinalized CD-R/CD-RW disc that already has tracks on it, the disc format is already set as audio CD or data CD, and that format must be used. NOTE • This unit cannot record WAV files to CD-R/CD-RW discs, but WAV files can be copied from USB/SD/CF media to CD-R/CD-RW discs. • This unit can play back WAV files copied to CD-R/ CD-RW discs. Creating audio CDs The following describes how to convert MP3 or WAV files on USB/SD/CF media to audio CD format and write them to a CD-R/CD-RW disc. The following procedure assumes that CD is selected as the current device and that the USB/SD/CF media that contains the copy-source files and the CD-R/CD-RW that is the copy destination are loaded in the unit. 1 Press the MENU [JOG] button (or remote control MENU button) to open the MENU screen. 2 Open the CD menu. 3 Select BURN TO CD. 5 Turn the MULTI JOG dial (or press the remote control 5 and b buttons) to select the device that contains the files to be copied. 6 Press the MULTI JOG dial (or remote control ENTER button) to open a pop-up window where you can select the CD-R/CD-RW disc format. NOTE • If the selected device media is still being read, MEDIA READ and a progress bar appear in a pop-up. • If media is not loaded in the selected device, MEDIA READ appears in a pop-up followed by ERROR and the media type (e.g. CF READ). 7 Turn the MULTI JOG dial (or press the remote control 5 and b buttons) to select CD-DA. NOTE If audio format files have already been written to the CD-R/CD-RW disc, the above pop-up window will not appear. CD-DA format will be selected automatically. 8 Press the MULTI JOG dial (or remote control ENTER button) to open the BURN SOURCE SELECT screen for the selected media. 9 Select the tracks to copy to the CD-R/CD-RW disc from the BURN SOURCE SELECT screen. You cannot select a folder. To select multiple files, when the desired file is selected, press the FUNCTION button (or remote control FUNC button). Repeat this for each file. Checkmarks (4) are placed next to selected files. You can only select multiple files that are in the same folder. To deselect a selected file, press the FUNCTION button (or remote control FUNC button) once again. 4 Press the MULTI JOG dial (or remote control ENTER button) to open a pop-up window where you can select the source device. NOTE • You can select multiple files only within the same folder, so once you use the FUNCTION button (or TASCAM SS-CDR200/SS-R200/SS-R100 63