TASCAM SS-R200 100 SS-R200 SS-CDR200 Owners Manual - Page 34

4 − Preparations 88 Using the menu 1 Press the MENU [JOG] button (or remote control MENU button) to open the MENU screen. 2 Open the PLAY menu. 3 Select REPEAT. 4 Press the MULTI JOG dial or , [LOCK] button (or remote control ENTER or t button) to move the cursor to the right and select the setting item. 5 Turn the MULTI JOG dial, (or press the remote control 5 and b buttons) to set it to ON (default value: OFF). 6 Press the HOME/DISPLAY button (or remote control HOME/DISP button) to return to the Home Screen. 88 Using the dedicated remote control button 1 Press the remote control REPEAT button to set --Repeat-- to ON. A pop-up appears showing that repeat playback is ON. 2 Press the remote control FUNC button to open the FUNCTION screen, and check that REPEAT is highlighted. 88 Turning repeat playback OFF Use the PLAY menu REPEAT item or press the remote control REPEAT button to turn it OFF. The REPEAT indicator on the FUNCTION screen appears unhighlighted when OFF. NOTE The repeat playback setting is retained even after the power is turned OFF. A-B repeat playback This lets you specify a desired region (A-B) within a track to be played back repeatedly. Follow these procedures to conduct A-B repeat playback. 1 During playback or when in playback standby, at the position where you want to start repeat playback, press the FINDER [A-B] button while pressing and holding the SHIFT button (or remote control A-B button) to set the starting point (A). --Repeat-- and A- appear in a pop-up on the Home Screen. 34 TASCAM SS-CDR200/SS-R200/SS-R100 NOTE If you press the remote control REPEAT button, the repeat playback starting point (A) will be cancelled. 2 Once again press the FINDER [A-B] button while pressing and holding the SHIFT button (or remote control A-B button) to set the ending point (B) of the repeat playback interval. --Repeat-- and A-B appear in a pop-up on the Home Screen. This completes setting the interval (A-B), and A-B repeat playback will start. NOTE • During playback if you press the remote control REPEAT or A-B button, Repeat and OFF appear in a pop-up, A-B repeat playback is cancelled, and playback will continue even after the designated ending point (B) is reached. • If you press the front panel or remote control STOP button to stop playback, the designated interval (A-B) is cleared. • The A-B repeat playback interval cannot span more than one track. Auto Cue function If the Auto Cue function is on, and you select a track to play, any "silent" portion at the beginning of the track will be skipped, and the track will be put into playback standby at the point where its "signal" begins to be audible. This means that sound will be heard immediately when you start playback. NOTE • When using the flash start function to start playback, Auto Cue function is disabled. • When the Auto Cue function is on, if a track is selected during playback, playback will start from the point where it becomes audible. If a track is selected when in playback standby, playback standby will start at the point where it becomes audible. • The Auto Cue function setting is retained even after the power is turned OFF. You can specify the threshold level (Auto Cue LEVEL) used to detect the audio signal when the Auto Cue function is active. In other words, any signal higher than the Auto Cue LEVEL will be treated as "signal," and any signal lower than this level will be treated as "silence."