TASCAM SS-R200 100 SS-R200 SS-CDR200 Owners Manual - Page 8

1 − Introduction Thank you very much for purchasing a TASCAM SS-CDR200 Solid State/CD Stereol Audio Recorder or SS-R200/SS-R100 Solid State Stereo Audio Recorder. Please read this manual thoroughly before using the unit so that you understand correct operating procedures and can use its functions fully. We hope that you enjoy using this unit for many years. Please keep this manual so that you can read it at any time. A digital copy of this manual can also be downloaded from the TEAC Global Site (http://teac-global. com/). SS-CDR200, SS-R200 and SS-R100 differences The SS-R200 model adds XLR balanced inputs and outputs, serial and parallel control connectors and EOM functions to the features of the SS-R100. The SS-CDR200 model adds a CD drive to the features of the SS-R200. The rear panels of the SS-CDR200 and SS-R200 models have XLR balanced input and output connectors as well as RCA unbalanced input and output connectors. The input signal can be set to either the XLR balanced inputs or the RCA unbalanced inputs. Features • 2-channel audio recorders can use USB memory, SD cards and CF cards • SS-CDR200 units can also use CDs • 1U rack-mount size • Using USB memory, SD and CF cards, playback and recording of files in MP3 (44.1/48 kHz) and WAV formats is possible (44.1/48 kHz, 16/24-bit, 24-bit can only be played back) • Using CD media, playback and recording of files in audio CD (CD-DA) and MP3 formats, as well as playback of WAV format files is possible (SS-CDR200 only) • Built-in parallel and serial control ports can be used for remote control (SS-CDR200/SS-R200 only) • Flash start function enables instant playback starting • Pitch control, key control and other playback control functions • Play area can be set as desired using playlists and folders • Track editing (WAV files only) • Built-in clock for time-stamping • Balanced (SS-CDR200/SS-R200 only) and unbalanced analog audio inputs and outputs • Coaxial digital audio inputs and outputs • Included wired remote control allow reliable remote operation • Control and character input using a PS/2 and USB keyboards possible • Transport and pitch can be controlled using a TASCAM RC-3F footswitch (sold separately) • Flash start using TASCAM RC-20 Direct Play Remote (sold separately) supported Included items This product includes the following items. Take care when opening the package not to damage the items. Keep the package materials for transportation in the future. Please contact the retailer where you purchased this unit if any of these items are missing or have been damaged during transportation. • Main unit 1 • AC power cord 1 • RC-SS2 remote control unit (with 5 m cable 1 • A rack-mounting screw kit 1 • Security Screw kit 1 • Owner's manual (this manual 1 The warranty is included at the end of this manual. Conventions used in this manual In this manual, we use the following conventions: • The front panel illustration on the cover of this manual is an SS-CDR200. The SS-R200 and SS-R100 models have different appearances. • The display screens shown in this manual are from the SS-CDR200. The SS-R200 and SS-R100 display screens are different in some cases. • Buttons, jacks and other parts on the main unit and external devices are indicated like this: HOME/ DISPLAY • Messages on the unit's display are shown like this: MOVE • "USB flash drive" is abbreviated as "USB memory." • "SD memory card" is abbreviated as "SD card." • "CompactFlash card" is abbreviated as "CF card. • CD-DA format is sometimes referred to as "audio CD" format. An audio disc containing tracks recorded in audio CD format is sometimes referred to as an "audio CD". • A CD containing MP3 or WAV files is sometimes referred to as a "data CD". • Additional information is provided as necessary as tips, notes and cautions. 8 TASCAM SS-CDR200/SS-R200/SS-R100