TASCAM SS-R200 100 SS-R200 SS-CDR200 Owners Manual - Page 64

10 - Copying files between CDs and other media (SS-CDR200) remote control FUNC button) to select the first file, you will no longer be able to move to a different folder. • In step 10 below, if you attempt to use ADD TRACK with a file that has already been selected, an Already has been entered warning message appears in a pop-up. • If you attempt to select a copy-source file that is less than 4 seconds, Cannot burn under 4s will appear in a pop-up. • If you are selecting only one file, there is no need to press the FUNCTION button (or remote control FUNC button). After selecting the desired file, proceed to step 10. 10 When you have selected all the files to be written to the CD-R/CD-RW disc, press the MULTI JOG dial (or remote control ENTER button) to confirm the selections and open the TRACK LIST screen. The time that will remain (REMAIN XXmin) on the CD-R/CD-RW disc after the files have been written will be displayed in the upper right of the screen. If the allowable time is exceeded, OVER will appear instead, and you will not be able to write the selected files to the CD-R/CD-RW disc. In this case, you'll need to delete some of the selected source files until the OVER indication disappears. If there are files that have already been written to the disc, these files will also be shown in this list. Note marks ( ) will appear next to existing tracks. Note marks ( ) will not appear next to tracks that will be added. NOTE As necessary, you can change the track order or remove files. For details about how to change and remove files, see "Moving files within the track list" and "Removing files from the track list" below. 11 To write the files, press the MULTI JOG dial (or remote control ENTER button) to open the following pop-up window. 12 If you want to add more tracks, choose ADD TRACK and press the MULTI JOG dial (or remote control ENTER button) to return to step 9. If you have completed selecting tracks, select BURN EXECUTE, and press the MULTI JOG dial (or remote control ENTER button). A confirmation pop-up message appears. 64 TASCAM SS-CDR200/SS-R200/SS-R100 13 Press the MULTI JOG dial (or remote control ENTER button) again to start writing tracks to the CD-R/ CD-RW disc. -- BURN -- and a progress bar appear in a pop-up while the disc is being written. When writing is completed, the CD menu screen will reopen. 88 Moving files within the track list While the TRACK LIST screen is open, you can follow these procedures to change the track order. You cannot change the order of tracks that have already been written to a CD-R/CD-RW disc. 1 Turn the MULTI JOG dial (or press the remote control 5 and b buttons) to select the track that you want to move to a different position. 2 Press the MULTI JOG dial (or remote control ENTER button) to open a pop-up window. 3 Select MOVE TRACK, and press the MULTI JOG dial (or remote control ENTER button). The file selected for moving blinks. 4 Turn the MULTI JOG dial (or press the remote control 5 and b buttons) to move the selected file to the desired position. 5 Press the MULTI JOG dial (or remote control ENTER button) to confirm the move. 6 Repeat steps 1-5 as necessary. 88 Removing files from the track list While the TRACK LIST screen is open, you can follow these procedures to remove a file. You cannot remove a file that has already been written to a CD-R/CD-RW disc. 1 Press the MENU [JOG] dial (or remote control MENU button) to open the FINDER screen for the selected media. 2 Turn the MULTI JOG dial (or press the remote control 5 and b buttons) to select the file you want to remove. 3 Press the MULTI JOG dial (or remote control ENTER button) to remove the checkmark (4) next to the file you want to remove. 4 Repeat steps 2-3 as necessary.