TRENDnet TEW-829DRU Users Guide - Page 23
Add static ARP entries, Network, MAC-Address, IPv4-Address, Apply
![]() |
View all TRENDnet TEW-829DRU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
TRENDnet User's Guide Add static ARP entries Network > LAN ARP (Address Resolution Protocol) is the protocol responsible for resolve IP addresses to hardware MAC addresses. Typically, ARP entries are dynamically learned and refreshed in the ARP table however, in the case where your application requires static ARP entries to always be present in the router ARP table, you can manually enter and add them to the router. (ex. applications: WoL (Wake on LAN) or Wake on WAN) 1. Log into your router management page (see "Access your router management page" on page 8). 2. Click on Network and click LAN. 3. Under the Static ARP section, click the MAC-Address drop-down list to select a MAC address from the list or select customer to manually enter a MAC address (format example: aa:bb:cc:dd:ee:ff). Limited Warranty Note: You can specify additional static ARP entries by clicking Add. Delete existing entries by clicking the Delete button next to the entry to be removed. 4. Click the IPv4-Address drop-down list and select the IPv4 address to assign to the MAC address ARP table entry or select custom to manually enter an IPv4 address (format example: 192.168.10.129) 5. Click Apply to save and commit the changes. © Copyright 2019 TRENDnet. All Rights Reserved. 16
![](/manual_guide/products/trendnet-tew829dru-user-s-guide-11ed069/23.png)