TRENDnet TEW-829DRU Users Guide - Page 72
Setting up the PPTP VPN client (Windows), Point to Point Tunneling Protocol
![]() |
View all TRENDnet TEW-829DRU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
TRENDnet User's Guide Setting up the PPTP VPN client (Windows) Note: This procedure provides a basic example how to setup PPTP VPN and establish connectivity using a Windows® 10 client computer. If you are using a different operating system or mobile device, please refer to the user's guide/manual of the third party operating system or device on configuring PPTP VPN. The PPTP VPN settings must match with the settings configured on the router. 1. Click the Start button and click the Settings icon. Start Button 2. Click Network & Internet. Settings icon Limited Warranty 5. Click the VPN provider drop-down list and select Windows (built-in). 6. Enter a name in the Connection name field. 7. Enter the Internet WAN IP address, DNS, or dynamic DNS hostname of your router to connect over the Internet. In the example below, the Internet WAN IP address of the router is 10.10.10.10. In your router, you can check the WAN IP address under Status > Overview, under Network in the IPv4 status section. 3. Click VPN in the left panel. 4. Under VPN, click Add a VPN connection. 8. Click the VPN type drop-down list and select Point to Point Tunneling Protocol (PPTP). 9. Click the Type of sign-in info drop-down list and select User name and password. © Copyright 2019 TRENDnet. All Rights Reserved. 65
![](/manual_guide/products/trendnet-tew829dru-user-s-guide-11ed069/72.png)