TRENDnet TEW-829DRU Users Guide - Page 82
Setting up IPsec server VPN (PSK with xAUTH
View all TRENDnet TEW-829DRU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
TRENDnet User's Guide Based on the example, the network settings will be the following: Setting up IPsec server VPN (PSK with xAUTH) Limited Warranty 1. Log into your router management page (see "Access your router management page" on page 8). 2. Click on Network, click VPN, and click the IPsec tab. 3. Under Overview, enter a tunnel name and click Add. (e.g. IPsec_Server) 10. Under Authentication Key, enter the Pre-Shared Key (PSK) for the IPsec VPN tunnel and click Apply. (e.g. 1234567890) 4. Click the Connection type drop-down list and select Remote Access (Roadwarrior). 5. For the Authentication type drop-down list and select IPSec XAUTH PSK. © Copyright 2019 TRENDnet. All Rights Reserved. 75
© Copyright 2019 TRENDnet. All Rights Reserved.
75
TRENDnet User’s Guide
Limited Warranty
Based on the example, the network settings will be the following:
10. Under Authentication Key, enter the
Pre-Shared Key
(PSK) for the IPsec VPN tunnel
and click
Apply
.
(e.g. 1234567890)
Setting up IPsec server VPN (PSK with xAUTH)
1. Log into your router management page (see “
Access your router management page
”
on page 8).
2. Click on
Network,
click
VPN
, and click the
IPsec
tab.
3. Under Overview, enter a tunnel name and click
Add
.
(e.g. IPsec_Server)
4. Click the Connection type drop-down list and select
Remote Access (Roadwarrior)
.
5. For the Authentication type drop-down list and select
IPSec XAUTH PSK.