TRENDnet TEW-829DRU Users Guide - Page 29
IP Address, Subnet Mask., Enabled, Apply
View all TRENDnet TEW-829DRU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
TRENDnet User's Guide 5. Under VID, enter the VLAN ID to assign to the new VLAN (4-4094, VLAN IDs 1-3 are reserved for use with the default LAN, WAN1, WAN2 interfaces) and set the tagged VLAN member port. Example: In the example below, we will create a new VLAN with VLAN ID: 50 and assign port 8 as a tagged VLAN member port. Limited Warranty 7. Under DHCP Server, click the Mode drop-down list and select Enabled to enable the DHCP server on the VLAN. Click Apply to save and commit the changes. Example: In the example below, we will enable the DHCP server on VLAN 50 and leave IP address range and lease defaults. This will assign a DHCP IP range of 101-199 to ensure any devices connected to this VLAN obtain IP address information via DHCP. 6. Enter the VLAN IP interface configuration under IP Address and Subnet Mask. Example: In the example below, we will enter the VLAN 50 interface IP address as 192.168.50.1 and subnet mask 255.255.255.0. © Copyright 2019 TRENDnet. All Rights Reserved. 22