Canon imageCLASS MF4270 imageCLASS MF4270 Reference Guide - Page 156
Fuser Roller, to select <ADJUST.
View all Canon imageCLASS MF4270 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
Before Using the Machine 1 Document and Paper 2 Copying 3 Sending and Receiving 4 Printing and Scanning 5 Network 6 Remote UI 7 System Manager Settings 8 Maintenance 9 Troubleshooting 10 Appendix 11 ˙ Fuser Roller If black streaks appear with printing, the fuser roller in the main unit may be dirty. Should this occur, clean the fusing roller in the following procedure. The roller should also be cleaned each time the toner cartridge is replaced. Load a sheet of blank LTR paper into the multi-purpose tray and start cleaning. - Cleaning the roller takes approximately 130 seconds. - When some jobs are stored in memory, this function is not available. 1. Press [Additional Functions]. 2. Press [ ] or [ ] to select , then press [OK]. Back Previous Next TOP 3. Load a sheet of blank LTR paper in the multi- purpose tray. 4. Press [ ] or [ ] to select , then press [OK]. Cleaning starts. - Use standard paper as the cleaning paper. - Throw away the cleaning paper after use. Table of Contents Index 9-7