Canon imageCLASS MF4270 imageCLASS MF4270 Reference Guide - Page 61

Before Using the Machine 1 Document and Paper 2 Copying 3 Sending and Receiving 4 Printing and Scanning 5 Network 6 Remote UI 7 System Manager Settings 8 Maintenance 9 Troubleshooting 10 Appendix 11 Advanced Copy Features ˙ Collate Copy You can copy documents collated into sets arranged in page order. This feature can be used together with both "Two-Sided Copy" (see p. 3-8) and "2 on 1 Combination" (see p. 3-7). 1. Set documents. Place the first page on the platen glass if you are not using the ADF. 2. Press [COPY]. If is set to in in , skip to step 4. 3. Press [Collate/2 on 1] repeatedly to select , then press [OK]. If you want to use with "2 on 1 Combination" (see p. 3-7) at the same time, select , then press [OK]. If you want to use with "Two-Sided Copy" at the same time, go to step 3 on p. 3-8. 4. Use the numeric keys to enter the desired copy quantity (1 to 99). Back Previous Next TOP 5. Press [Start]. When the documents are loaded in the ADF, collate copying starts and no further operation is required. 6. Place the next page of the document on the platen glass, then press [Start]. Repeat this step to scan all pages. 7. Press [OK]. The machine prints the remaining sets of copies. - To cancel all settings, press [Stop/Reset]. - When you switch the mode by pressing the mode keys such as [FAX], all settings will be also canceled. If you want to keep the settings, store the settings in in . (See "STANDARD SETTINGS," on p. 11-8.) - When scanning multiple page documents, may appear in the LCD and scanning may be canceled. If this happens, press [OK] to return to standby mode, and print, send, or delete any documents stored in memory. Table of Contents Index 3-6