Cisco 7925G Administration Guide - Page 129

Chapter 5 Configuring Settings on the Cisco Unified Wireless IP Phone 7925G Changing Phone Settings To access the Phone Settings menu options on a Cisco Unified Wireless IP Phone 7925G, follow these steps: Procedure Step 1 Step 2 Step 3 Step 4 Choose SETTINGS > Phone Settings. Press the number for the setting that you want to configure (or you can scroll to the setting and press the Select button). Press the number for the setting category. Press the number for the setting that you want to change. For descriptions of the settings, see Table 5-4. For specific instructions to change these settings, refer to "Using Phone Settings," in the Cisco Unified Wireless IP Phone7925G Guide. Table 5-4 Configurable Settings for the Phone Sounds, Display, and Keypad Phone Setting Sound Settings Ring Tone Volumes Ring Speaker Handset Headset Alert Pattern Ring Output Display Settings Display Brightness Display Timeout LED Coverage Indicator Keypad Settings Any Key Answer Keypad Auto Lock Keypad Tone Description Assigns the ring tone for each line on the phone. Sets the ring volume level for the phone. Sets the volume for the speaker. Sets the volume for the handset. Sets the volume for the headset. Sets the ring, vibrate, or combination to alert the user of an incoming call. Sets the phone to ring through speaker, headset, or both speaker and headset. Sets the brightness for the phone screen. Sets the length of time for the phone screen to display before turning off or disables the timer so screen always displays. Enables or disables the LED blink to indicate that the phone is in service and within the coverage area. Enables or disables using any key or button on the phone to answer a ringing call. Sets the length of time for the keypad to lock automatically after no keypad activity or disables auto lock. Enables or disables tones for keypad presses. OL-15984-01 Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1) 5-11