Cisco 7925G Administration Guide - Page 82

Updating the Phones Remotely Chapter 4 Using the Cisco Unified Wireless IP Phone 7925G Web Pages Step 9 Step 10 Return to the Phone Configuration page in Cisco Unified Communications Manager Administration and set the Web Access field back to Read Only or Disabled. Reset the phone from Cisco Unified Communications Manager to disable full access to the web pages. Be sure to change the Web Access privileges and reset the phone to prevent users from making configuration changes on the phone web pages. Note If a wireless IP phone was previously registered to Cisco Unified CallManager Administration Release 4.x, and you try to register to Cisco Unified Communications Manager Administration 5.x, 6.0(1), 7.0(1), the Phone Configuration web page password might be set to "Cisco." Table 4-1 Home Web Page Menus Menu Setup • Network Profiles • USB Settings • Trace Settings • Wavelink Settings • Certificates Configurations Phone Book Information • Network • Wireless LAN • Device Statistics • Wireless LAN • Network Stream Statistics • Stream 1 • Stream 2 Related Information Configuring Network Profiles, page 4-8 Configuring USB Settings, page 4-26 Configuring Trace Settings, page 4-27 Configuring Wavelink Settings, page 4-29 Configuring Wireless LAN Security, page 4-13 Configuring the Phone Book, page 4-29 Summary Information on the Home Web Page, page 4-7 Displays Rx and Tx statistics. Displays IP, TCP, and UDP statistics. Displays RTP statistics and voice quality metrics. Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1) 4-6 OL-15984-01