Cisco 7925G Administration Guide - Page 87
Configuring IP Network, Settings, Configuring the Alternate, TFTP Server
UPC - 882658201943
View all Cisco 7925G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Chapter 4 Using the Cisco Unified Wireless IP Phone 7925G Web Pages Configuring Network Profiles Table 4-3 Basic Network Profile Settings (continued) Item Description For More Information, See... IP Network Configuration Obtain IP address and Gets the IP address and DNS servers DNS servers automatically. automatically Configuring IP Network Settings, page 4-23 Use the following IP address and DNS servers Disables DHCP and uses these static settings: • IP Address • Subnet Mask • Default Router • Primary DNS • Secondary DNS • Domain Name TFTP Obtain TFTP Servers Enables automatic assignment of TFTP servers Configuring the Alternate Automatically TFTP Server, page 4-24 Use the following TFTP servers Assigns static TFTP server IP addresses to: • TFTP Server 1 • TFTP Server 2 Table 4-4 Advanced Network Profile Settings TSPEC Settings Minimum PHY Rate Surplus Bandwidth 802.11G Power Settings Channel Status MaxTxPower Minimum data rate that outbound traffic uses. Modify this setting when Call Admission Control (CAC) is enabled. Configuring Advanced Network Profile Settings, page 4-25 Note Cisco APs support only PHY rates of 6, 11, 12, or 24. The default is 12. If you use an access point that using 802.11b, the PHY rate must be configured to the supported rate. Excess bandwidth beyond application requirements Assigns the channels Configuring Advanced Enabled-Identifies enabled channels in WLAN Network Profile to improve scanning for the phone. Settings, page 4-25 Sets the maximum transmit power for the phone OL-15984-01 Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1) 4-11