D-Link DWS-4026 Product Manual - Page 118

D-Link Unified Access System Software User Manual 12/10/09 Figure 58: Double VLAN Tunneling Field Slot/Port Mode EtherType Table 48: Double VLAN Tunneling Fields Description Select the physical interface for which you want to display or configure data. Select All to set the parameters for all ports to same values. For non-stacking platforms, the field name is Slot/Port. This specifies the administrative mode for Double VLAN Tagging: • Enable: Double VLAN Tagging is enabled for the specified port (or All ports). • Disable: Double VLAN Tagging is disabled for the specified port (or All ports), which is the default value. The two-byte hex EtherType to be used as the first 16 bits of the Double VLAN tag: • 802.1Q Tag: Commonly used tag representing 0x8100 • vMAN Tag: Commonly used tag representing 0x88A8 • Custom Tag: If you select this EtherType option, the screen refreshes, and the Custom Value field appears. • Custom Value: Enter a custom EtherType value in any range from (0 to 65535). • If you make any changes to the page, click Submit to apply the changes to the system. DOUBLE VLAN TUNNELING SUMMARY The Double VLAN Tunneling Summary page shows the double VLAN tunneling configuration status for all ports on the system. To access the Double VLAN Tunneling Summary page, click LAN > Monitoring > VLAN Summary > Double VLAN Status in the navigation tree. Page 118 Multiple Port Mirroring Document 34CSFP6XXUWS-SWUM100-D7