D-Link DWS-4026 Product Manual - Page 65

Software User Manual 12/10/09 D-Link Unified Access System SERIAL PORT The Serial Port Configuration page allows you to change the switch's serial port settings. In order for a terminal or terminal emulator to communicate with the switch, the serial port settings on both devices must be the same. Some settings on the switch cannot be changed. To view or configure the serial port settings on the switch, click LAN > Administration > Serial Port in the navigation tree. Figure 15: Serial Port Field Serial Port Login Timeout (minutes) Baud Rate (bps) Character Size (bits) Flow Control Stop Bits Parity Table 9: Serial Port Fields Description Indicates how many minutes of inactivity should occur on a serial port connection before the switch closes the connection. Enter a number between 0 and 160. The factory default is 5. Entering 0 disables the timeout. Select the default baud rate for the serial port connection from the menu. The factory default is 115200. The number of bits in a character. This is always 8. Whether hardware flow control is enabled or disabled. It is always disabled. The number of stop bits per character. Its is always 1. The parity method used on the serial port. It is always None. • If you change any data, click Submit to apply the changes to the system. If you want the switch to retain the new values across a power cycle, you must perform a save. Document 34CSFP6XXUWS-SWUM100-D7 Serial Port Page 65