D-Link DWS-4026 Product Manual - Page 84
Managing Logs, Search, Refresh
UPC - 790069325533
View all D-Link DWS-4026 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
D-Link Unified Access System Software User Manual 12/10/09 1 Enter the two-byte hexadecimal VLAN ID followed by the six byte hexadecimal MAC address in two-digit groups separated by colons. For example, 01:23:45:67:89:AB:CD:EF where 01:23 is the VLAN ID and 45:67:89:AB:CD:EF is the MAC address. 2 Click Search. If the address exists, that entry is displayed as the first entry in the table after the screen refreshes. The entry is followed by the remaining (greater) MAC addresses. An exact match is required. If you click Refresh, the MAC addresses with lower values are displayed again. MANAGING LOGS The switch may generate messages in response to events, faults, or errors occurring on the platform as well as changes in configuration or other occurrences. These messages are stored both locally on the platform and forwarded to one or more centralized points of collection for monitoring purposes as well as long term archival storage. Local and remote configuration of the logging capability includes filtering of messages logged or forwarded based on severity and generating component. The in-memory log stores messages in memory based upon the settings for message component and severity. On stackable systems, this log exists only on the management unit. Other platforms in the stack forward their messages to the management unit log. Access to in-memory logs on other than the management unit is not supported. The Log folder contains links to the following pages: • "Buffered Log Configuration" • "Command Logger Configuration" • "Hosts Configuration" • "Syslog Configuration" Page 84 Managing Logs Document 34CSFP6XXUWS-SWUM100-D7