D-Link DWS-4026 Product Manual - Page 140

D-Link Unified Access System Software User Manual 12/10/09 SYSTEM RESET Use the System Reset page to reboot the system. If the platform supports stacking, you can reset any of the switches in the stack, or all switches in the stack from this page. To access the System Reset page, click Tool > Reboot System in the navigation tree. Figure 73: System Reset For Stacking platforms, you can select one or all switches in the stack to reset from the drop-down menu. For platforms that do not support stacking, this field is not present. • Click Reset to initiate the system reset. If you have not saved the changes that you submitted since the last system reset, the changes will not be applied to the system after the reset. RESET CONFIGURATION TO DEFAULTS Use the Reset Configuration to Defaults page to reset the system configuration to the factory default values. By default, the switch IP address is 10.90.90.90 and the DHCP client is disabled. When you reset the system to its default values, the network IP address resets to 10.90.90.90. For information about configuring network information, see "Connecting the Switch to the Network" on page 45. To access the Reset Configuration to Defaults page, click Tool > Reset Configuration in the navigation tree. Figure 74: Reset Configuration to Defaults • Click Reset to restore the factory default settings. The screen refreshes and asks you to confirm the reset. Click Reset again to complete the action. RESET PASSWORDS TO DEFAULTS Use the Reset Passwords to Defaults page to reset the passwords for the default read/write (admin) and read-only (guest) users on the system. By default, the passwords are blank. If you have configured additional read-only users on your system, their passwords are not affected. Page 140 Using System Utilities Document 34CSFP6XXUWS-SWUM100-D7