D-Link DWS-4026 Product Manual - Page 418

D-Link Unified Access System Software User Manual 12/10/09 Figure 294: Radio Settings The following table describes the fields you can configure from the Radio tab on the Basic Setup page. To change the settings on this page, you must first select the radio you want to configure (1 or 2). After you change the settings, click Submit to apply the settings. Changes to the settings apply only to the selected radio. Field 1-802.11b/g/n 2-802.11a/n State Table 260: Radio Settings Description From this field, you can select the radio that you want to configure. By default, Radio 1 operates in IEEE 802.11a/n mode, and Radio 2 operates in IEEE 802.11b/g/n mode. If you change the mode, the labels for the radios change accordingly. Changes to the settings apply only to the selected radio. Specify whether you want the radio on or off by clicking On or Off. If you turn off a radio, the AP sends disassociation frames to all the wireless clients it is currently supporting so that the radio can be gracefully shutdown and the clients can start the association process with other available APs. Page 418 Basic Setup Document 34CSFP6XXUWS-SWUM100-D7