D-Link DWS-4026 Product Manual - Page 382

D-Link Unified Access System Software User Manual 12/10/09 Field MAC Address IP Address CP Configuration Protocol Verification Table 239: Interface - Client Status Description Identifies the MAC address of the wireless client. If the MAC address is marked with an asterisk (*), the authenticated client is authenticated by a peer switch. In order words, the cluster controller was not the authenticator. Identifies the IP address of the wireless client. Identifies the captive portal the client used to access the network. Shows the current connection protocol, which is either HTTP or HTTPS. Shows the current account type, which is Guest, Local, or RADIUS. Viewing the Client CP Association Status Use the CP - Client Status page to view clients that are authenticated to a specific CP configuration. Figure 270: CP - Client Status The drop-down menu lists each CP configured on the switch. To view information about the clients connected to the CP, select it from the list. The following table describes the fields on the Client CP Association Status page. Field MAC Address IP Address Interface Protocol Verification Table 240: CP - Client Status Description Identifies the MAC address of the wireless client. If the MAC address is marked with an asterisk (*), the authenticated client is authenticated by a peer switch. In order words, the cluster controller was not the authenticator. Identifies the IP address of the wireless client. Identifies the interface the client used to access the network. Shows the current connection protocol, which is either HTTP or HTTPS. Shows the current account type, which is Guest, Local, or RADIUS. SNMP TRAP CONFIGURATION Use the SNMP Trap Configuration page to configure whether or not SNMP traps are sent from the Captive Portal and to specify captive portal events that will generate a trap. Page 382 Captive Portal Configuration Document 34CSFP6XXUWS-SWUM100-D7