D-Link DWS-4026 Product Manual - Page 68

D-Link Unified Access System Software User Manual 12/10/09 Table 10: Network Connectivity Fields (Cont.) Field Description IPv6 Fields: These display when IPv6 is selected as the protocol. IPv6 Mode Enables or disables IPv6 mode on the interface. IPv6 Prefix IPv6 Gateway If no IPv6 address displays, select Add and then enter an IPv6 prefix/length. Select the EUI64 option if the last 64 bits are to be derived from the MAC address. For example, you can enter 2001::/64 and select the EUI64 option to have the 64-bit address calculated from the MAC address. Enter the IPv6 gateway address (do not include a prefix). Default Routers Displays the address(es) entered in the IPv6 Gateway field. • If you change any of the network connection parameters, click Submit to apply the changes to the system. If you want the switch to retain the new values across a power cycle, you must perform a save. NETWORK DHCP CLIENT OPTIONS Use the fields on this page to enable and configure vendor class identifier information that the DHCP client on the switch sends to the DHCP server when it requests a lease. To access this page, click LAN > Administration > Network DHCP Client Options. Figure 18: DHCP Client Options Table 11: DHCP Client Option Fields Field DHCP Vendor Class ID Mode DHCP Vendor Class ID String Description Specify whether to enable or disable the vendor class identifier mode. Enter the text to add to DHCP requests as Option-60, which is the Vendor Class Identifier option. Page 68 Network DHCP Client Options Document 34CSFP6XXUWS-SWUM100-D7