D-Link DWS-4026 Product Manual - Page 145

Software User Manual 12/10/09 D-Link Unified Access System UPLOAD FILE FROM SWITCH (TFTP) Use the Upload File from Switch page to upload configuration (ASCII) and image (binary) files from the switch to the TFTP server. To display the Upload File from Switch page, click Tool > Upload File in the navigation tree. Figure 77: Upload File from Switch Field File Type Image Name TFTP Server Address Type TFTP Server Address TFTP File Path TFTP File Name Start File Transfer Table 63: Upload File from Switch Fields Description Specify what type of file you want to upload: • CLI Banner: Retrieves the CLI banner file. • Code: Retrieves a stored code image. • Configuration: Retrieve the stored startup configuration (.cfg) and copy it to a TFTP server. • Text Configuration: Retrieves the text configuration file startup-config. • Error Log: Retrieves the system error (persistent) log, sometimes referred to as the event log. • Buffered Log: Retrieves the system buffered (in-memory) log. • Trap Log: Retrieves the system trap records. Specify the code image to upload, either image1 or image2. This field is only visible when Code is selected as the File Type. The factory default is image1. Specify either IPv4 or IPv6 address to indicate the format of the TFTP Server Address field. The factory default is IPv4. Enter the IP address of the TFTP server in accordance with the format indicated by the TFTP Server Address Type. The factory default is the IPv4 address 0.0.0.0. Enter the path on the TFTP server where you want to put the file. You may enter up to 32 characters. The factory default is blank. Enter a destination file name for the file to upload. You may enter up to 32 characters. The factory default is blank. To initiate the file upload, check this box before clicking Submit. Document 34CSFP6XXUWS-SWUM100-D7 Using System Utilities Page 145