D-Link DWS-4026 Product Manual - Page 189

Software User Manual 12/10/09 D-Link Unified Access System VLAN PORT CONFIGURATION Use the VLAN Port Configuration page to configure a virtual LAN on a port. To access the VLAN Port Configuration page, click LAN > L2 Features > VLAN > Port Configuration in the navigation tree. Figure 113: VLAN Port Configuration Field Slot/Port Port VLAN ID Acceptable Frame Types Ingress Filtering Port Priority Table 98: VLAN Port Configuration Fields Description Select the physical interface for which you want to display or configure data. Select All to set the parameters for all ports to same values. Specify the VLAN ID you want assigned to untagged or priority tagged frames received on this port. The factory default is 1. Specify how you want the port to handle untagged and priority tagged frames. Whichever you select, VLAN tagged frames will be forwarded in accordance with the IEEE 802.1Q VLAN standard. The factory default is Admit All. • VLAN Only: The port will discard any untagged or priority tagged frames it receives. • Admit All: Untagged and priority tagged frames received on the port will be accepted and assigned the value of the Port VLAN ID for this port. Specify how you want the port to handle tagged frames: • Enable: A tagged frame will be discarded if this port is not a member of the VLAN identified by the VLAN ID in the tag. • Disable: All tagged frames will be accepted. The factory default is disable. Specify the default 802.1p priority assigned to untagged packets arriving at the port. • If you change any information on the page, click Submit to apply the changes to the system. Document 34CSFP6XXUWS-SWUM100-D7 Managing VLANs Page 189