D-Link DWS-4026 Product Manual - Page 86

D-Link Unified Access System Software User Manual 12/10/09 This log message has a severity level of 7 (15 mod 8), which is a debug message. The message was generated by the MSTP component running in thread id 2110. The message was generated on August 24 05:34:05 by line 318 of file mstp_api.c. This is the 237th message logged with system IP 0.0.0.0 and unit number 1. • Click Refresh to update the page with the latest messages. COMMAND LOGGER CONFIGURATION Use the Command Logger Configuration page to enable the system to log all CLI commands issued on the system. The command log messages are interleaved with the other system logs messages. To access the Command Logger Configuration page, click LAN > Administration > Log > Command Logger Configuration in the navigation menu. Figure 32: Command Logger Configuration Field Admin Mode Table 24: Command Logger Configuration Fields Description This field determines whether to log CLI commands in the system log file. • Enable: The system logs CLI commands. The commands appear in messages on the Buffered Log page. For example, the following log messages shows when the CLI command show logging buffered was issued, from which IP address the command was issued, and the name of the user who issued the command: NOV 29 22:25:00 10.254.24.172-1 UNKN[243420816]: cmd_logger_api.c(87) 34 %% CLI:10.254.24.65:admin:show logging buffered • Disable: This system does not log CLI commands. • If you change the administrative mode, click Submit to apply the change to the system. CONSOLE LOG CONFIGURATION Use the Console Log Configuration page to control logging to any serial device attached to the switch. To access the Console Log Configuration page, click LAN > Administration > Log > Console Log Configuration in the navigation menu. Page 86 Managing Logs Document 34CSFP6XXUWS-SWUM100-D7