D-Link DWS-4026 Product Manual - Page 315

Software User Manual 12/10/09 D-Link Unified Access System VRRP Interface Tracking Configuration Use VRRP Interface Tracking to track a specific interface IP state within the router that can alter the priority level of a virtual router for a VRRP group. An exception to this is, if that VRRP group is the IP address owner, its priority is fixed at 255 and cannot be reduced through the tracking process. To display the page, click LAN > L3 Features > VRRP > Virtual Router Configuration in the navigation tree, then click the Track Interface button. Figure 219: VRRP Interface Tracking Configuration Field Slot/Port Virtual Router ID S. No Tracking Interface Priority Decrement Interface State Remove Table 198: VRRP Interface Tracking Configuration Fields Description The interface associated with the Virtual Router ID. The Virtual Router ID for which data is to be displayed. The serial number for this row. The Tracked Interface for which data is to be displayed. The priority decrement for the tracked interface. The valid range is 1 to 254. The default value is 10. The IP state of the tracked interface. Removes the selected Tracking Interface from the VRRP tracked list. • Click Add to proceed to the VRRP Interface Tracking page. • Click Submit to apply the new configuration. Configuration changes take effect immediately. These changes will not be retained across a power cycle unless a Save configuration is performed. • Click Refresh to refresh the page with the most current data from the switch. • Click Cancel to return to the Virtual Router Configuration page. Document 34CSFP6XXUWS-SWUM100-D7 Virtual Router Redundancy Protocol (VRRP) Page 315