D-Link DWS-4026 Product Manual - Page 552

D-Link Unified Access System Software User Manual 12/10/09 8 Configure the third VAP. Because this VAP uses WPA Enterprise, wireless clients must authenticate by using an external RADIUS server. Make sure that the RADIUS Authentication Server Configured field shows the status as Configured. For more information about configuring the RADIUS server, see the steps that pertain to setting up the RADIUS server in "Configuring 802.1X Network Access Control" on page 548. a. Delete the existing SSID and enter Voice in the SSID field. b. In the VLAN field, enter 30. c. From the Security option, select WPA. Additional security fields appear. d. Clear the WPA option so that only WPA2 clients can connect to the VAP. e. Select WPA Enterprise f. Select the CCMP (AES) option. g. From the L2 Distributed Tunneling Mode field, select Enable to allow the clients to roam among APs in different subnets without losing their network connection. i. From the DiffServ Policy UP field, select the policy to apply to traffic transmitted from wireless clients to the AP. j. Click Submit. Page 552 Configuring a Virtual Access Point Document 34CSFP6XXUWS-SWUM100-D7