D-Link DWS-4026 Product Manual - Page 99

Software User Manual 12/10/09 D-Link Unified Access System Field Priority Version Table 34: SNTP Server Configuration Fields (Cont.) Description Specifies the priority of this server entry in determining the sequence of servers to which SNTP requests are sent. Values are 1 to 3, and the default is 1. Servers with lowest numbers have priority Enter the protocol version number. Values are 1 to 4, and the default is 4. • To add an SNTP server, select Create from the Server list, complete the remaining fields as desired, and click Submit. The SNTP server is added, and is now reflected in the Server list. You must perform a save to retain your changes over a power cycle. • To removing an SNTP server, select the IP address of the server to remove from the Server list, and then click Delete. The entry is removed, and the device is updated. SNTP SERVER STATUS The SNTP Server Status page displays status information about the SNTP servers configured on your switch. To access the SNTP Server Status page, click LAN > Monitoring > SNTP Summary > Server Status in the navigation menu. Field Address Last Update Time Last Attempt Time Figure 45: SNTP Server Status Table 35: SNTP Server Status Fields Description Specifies all the existing Server Addresses. If no Server configuration exists, a message saying "No SNTP server exists" flashes on the screen. Specifies the local date and time (UTC) that the response from this server was used to update the system clock. Specifies the local date and time (UTC) that this SNTP server was last queried. Document 34CSFP6XXUWS-SWUM100-D7 Configuring SNTP Settings Page 99