D-Link DWS-4026 Product Manual - Page 460

D-Link Unified Access System Software User Manual 12/10/09 Field 802.11a Support 802.11bg Support 802.11n Support Radio Count VAP Count Table 280: AP Hardware Capability Radio Detail Description Shows whether support for IEEE 802.11a mode is enabled. Shows whether support for IEEE 802.11bg mode is enabled. Shows whether support for IEEE 802.11n mode is enabled. Displays the number of radios supported on the hardware platform, which is either 1 or 2. Displays the number of VAPs the radio supports. All AP Status The All AP Status page shows summary information about managed, failed, and rogue access points the switch has discovered or detected. Figure 317: All Access Points The font color for the AP listing indicates that the AP is one of the following types: • Green-Managed AP • Red-Failed AP • Gray-Rogue AP • Amber-Peer Managed AP You can manually delete status entries. To clear all APs from the All Access Points status page except Managed Access Points, click Delete All. To configure an Authentication Failed AP to be managed by the switch the next time it is discovered, select the check box next to the MAC address of the AP and click Manage. You will be presented with the Valid Access Point Configuration page. You can then configure the AP and click Submit to save the AP in the local Valid AP database. If you use a RADIUS server for AP validation, you must add the MAC address of the AP to the AP database on the RADIUS server. Page 460 Monitoring Status and Statistics Document 34CSFP6XXUWS-SWUM100-D7