D-Link DWS-4026 Product Manual - Page 479
Viewing Associated Client Neighbor AP Status, Table 299, Field, Description, Table 300
UPC - 790069325533
View all D-Link DWS-4026 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 479 highlights
Software User Manual 12/10/09 D-Link Unified Access System Table 299: Associated Client QoS Status Field Actual RADIUS (Cached) Client QoS Operational Status Bandwidth Limit Down Bandwidth Limit Up Access Control Down Access Control Up Diffserv Policy Down Diffserv Policy Up Description Use the selector to determine the source of the information the page displays: • Select Actual to display either the actual status parameters configured on the AP. • Select RADIUS (Cached) to display any client QoS parameters that were obtained for the client from a RADIUS server when using 802.1X authentication. Shows whether QoS is enforced for the client. Shows the maximum rate at which the client receives traffic from the AP in bits per second. The rate shown in this field is the configured value rounded down to the nearest 64 kbps, A value of 0 means no bandwidth limiting is in effect in this direction. Shows the maximum rate at which the client transmits traffic to the AP in bits per second. The rate shown in this field is the configured value rounded down to the nearest 64 kbps, A value of 0 means no bandwidth limiting is in effect in this direction. Shows which ACL, if any, is applied to traffic from the AP to the client. Shows which ACL, if any, is applied to traffic from the client to the AP. Shows which DiffServ policy, if any, is applied to traffic from the AP to the client. Shows which DiffServ policy, if any, is applied to traffic from the client to the AP. Viewing Associated Client Neighbor AP Status The WLAN > Monitoring > Client > Associated Clients > Neighbor APs page for the associated client status shows information about access points that the client detects. The information on this page can help you determine the managed AP an associated client might use for roaming. Use the menu above the table to select the MAC address of the client with the information to view. Figure 324: Associated Client Neighbor AP Status Table 300 describes the information available on the Neighbor AP page for the associated client status. Field AP MAC Address Location Radio Table 300: Associated Client Neighbor AP Status Description The base Ethernet address of the Unified Switch managed AP. The configured descriptive location for the managed AP. The radio interface and its configured mode that detected this client as a neighbor. Document 34CSFP6XXUWS-SWUM100-D7 Monitoring Status and Statistics Page 479