D-Link DWS-4026 Product Manual - Page 94

D-Link Unified Access System Software User Manual 12/10/09 OUTBOUND TELNET CLIENT CONFIGURATION The outbound telnet feature is not available on all platforms. Use the outbound telnet client settings to control the telnet sessions that originate from the switch and connect to a remote system. To access the Outbound Telnet Client Configuration page, click LAN > Administration > Outbound Telnet Client Configuration in the navigation menu. Figure 41: Outbound Telnet Field Admin Mode Maximum Sessions Session Timeout Table 31: Outbound Telnet Fields Description Specifies whether the Outbound Telnet service is Enabled or Disabled. The default value is Enabled. • Enable: Users can initiate outbound telnet sessions from the switch CLI. • Disable: No outbound telnet sessions can originate from the switch. Specifies the maximum number of Outbound Telnet Sessions allowed. The default value is 5. The valid range is 0 to 5 sessions. Specifies the Outbound Telnet login inactivity timeout. The default value is 5. The valid range is 1 to 160 minutes. • If you change any data, click Submit to apply the changes to the system. If you want the switch to retain the new values across a power cycle, you must perform a save. Page 94 Outbound Telnet Client Configuration Document 34CSFP6XXUWS-SWUM100-D7