D-Link DWS-4026 Product Manual - Page 428

D-Link Unified Access System Software User Manual 12/10/09 Table 263: Wireless Network Configuration (Cont.) Field Description RADIUS Authentication Server Name RADIUS Authentication Server Status Enter the name of the RADIUS server that the VAP uses for AP and client authentications. The name can contain up to 32 alphanumeric characters. Spaces, underscores, and dashes are also permitted. Any RADIUS information you configure for the wireless network overrides the global RADIUS information configured on the Wireless Global Configuration page. The switch acts as the RADIUS client and performs all RADIUS transactions on behalf of the APs and wireless clients. Indicates whether the RADIUS authentication server is configured for the VAP. To configure RADIUS server information, go to the LAN > Security > RADIUS > Server Configuration page. RADIUS Accounting Server Name Enter the name of the RADIUS server that the VAP uses for reporting wireless client associations and disassociations. The name can contain up to 32 alphanumeric characters. Spaces, underscores, and dashes are also permitted. Any RADIUS information you configure for the wireless network overrides the global RADIUS information configured on the Wireless Global Configuration page. RADIUS Accounting Server Status RADIUS Use Network Configuration Indicates whether the RADIUS accounting server is configured. To configure RADIUS accounting server information, go to LAN > Security > RADIUS > Accounting Server Configuration. This field controls whether the VAP uses the network RADIUS settings or the global RADIUS settings. • Enable: Use RADIUS Servers defined on the Wireless Network Configuration page. • Disable: Use RADIUS servers defined on the Wireless Global Configuration page. RADIUS Accounting Security Select this option to enable RADIUS accounting for wireless clients. The default AP profile does not use any security mechanism by default. In order to protect your network, D-Link strongly recommends that you select a security mechanism so that unauthorized wireless clients cannot gain access to your network. The following WLAN network security options are available: • None • WEP • WPA/WPA2 • WPA Personal • WPA Enterprise If you select WEP or WPA/WPA2 as your security mechanism, a dialogue box asks if you want to change network security. After you click OK, additional fields appear, and any network settings that you modified are applied to the switch. "Configuring AP Security" on page 431 describes the security mechanisms and the additional fields you can configure if you select WEP or WPA/WPA2. Page 428 Basic Setup Document 34CSFP6XXUWS-SWUM100-D7