D-Link DWS-4026 Product Manual - Page 98

D-Link Unified Access System Software User Manual 12/10/09 Field Broadcast Poll Interval Unicast Poll Timeout Unicast Poll Retry Table 33: SNTP Global Configuration Fields (Cont.) Description Specifies the number of seconds between broadcast poll requests expressed as a power of two when configured in broadcast mode. Broadcasts received prior to the expiry of this interval are discarded. Allowed range is (6 to 10). Default value is 6. Specifies the number of seconds to wait for an SNTP response when configured in unicast mode. Allowed range is (1 to 30). Default value is 5. Specifies the number of times to retry a request to an SNTP server after the first timeout before attempting to use the next configured server when configured in unicast mode. Allowed range is (0 to 10). Default value is 1. • If you change any of the settings on the page, click Submit to apply the changes to system. SNTP SERVER CONFIGURATION Use the SNTP Server Configuration page to view and modify information for adding and modifying Simple Network Time Protocol SNTP servers. To display the SNTP Server Configuration page, click LAN > Administration > SNTP > SNTP Server Configuration in the navigation tree. Field Server Address / Hostname Address Type Port Figure 44: SNTP Server Configuration Table 34: SNTP Server Configuration Fields Description Select the IP address of a user-defined SNTP server to view or modify information about an SNTP server, or select Create to configure a new SNTP server. You can define up to three SNTP servers. Enter the IP address or the hostname of the SNTP server. Select IPv4 if you entered an IPv4 address or DNS if you entered a hostname. Enter a port number from 1 to 65535. The default is 123. Page 98 Configuring SNTP Settings Document 34CSFP6XXUWS-SWUM100-D7