D-Link DWS-4026 Product Manual - Page 494

D-Link Unified Access System Software User Manual 12/10/09 Table 316: WIDS AP Rogue Classification Field Description Test Result Shows whether this test reported the device as rogue. In some cases the test may report a positive result, be enabled, but not report the device as rogue because the device is allowed to operate in this mode. Time Since First Report Time stamp indicating how long ago this test first detected the condition. Time Since Last Report Time stamp indicating how long ago this test last detected the condition. DETECTED CLIENT STATUS Wireless clients are detected by the wireless system when the clients either attempt to interact with the system or when the system detects traffic from the clients. The Detected Client Status page contains information about clients that have authenticated with an AP as well information about clients that disassociate and are no longer connected to the system. To access the page click WLAN > Monitoring > Client > Detected Clients. The Cluster Controller receives information about associated clients from all switches in the cluster, and you can disassociate clients on any AP in the cluster from the Cluster Controller. Figure 340: Detected Client Status To learn more about a client listed on the page, click the MAC address of the client. To clear the rogue status of all clients listed as rogues in the Detected Client database, click Acknowledge All Rogues. The status of an acknowledge client is returned to the status it had when it was first detected. If the detected client fails any of the tests that classify it as a threat, it will be listed as a Rogue again. To delete individual clients from the Detected Client database, select the check box next to the MAC address of each client to delete, and click Delete. To delete all detected clients, regardless of their status, from the Detected Client database, click Delete All. Page 494 Monitoring and Managing Intrusion Detection Document 34CSFP6XXUWS-SWUM100-D7