D-Link DWS-4026 Product Manual - Page 523

Software User Manual 12/10/09 D-Link Unified Access System Figure 364: Peer Switch Configuration Enable/Disable You can make changes to a configuration that has been sent to one or more peer switches, and you can make changes to a configuration received from a peer switch. No changes automatically propagate from one switch to the cluster; you must manually initiate a request on one switch in order to copy any configuration to its peers. Table 339 shows the fields on the detail page for Peer Switch Configuration Enable/Disable page. Field Global Discovery Channel/Power AP Database Table 339: Peer Switch Configuration Enable/Disable Description Enable this field to include the basic and advanced global settings in the configuration that the switch pushes to its peers. The configuration does not include the switch IP address since that is a unique setting. To view current basic global settings, click the WLAN > Administration > Basic Setup > Global tab. To view current advanced global settings, click the WLAN > Advanced Configuration > Global page. Enable this field to include the L2 and L3 discovery information, including the VLAN list and IP list, in the configuration that the switch pushes to its peers. To view the discovery settings on the local switch, click the WLAN > Administration > Basic Setup > Discovery tab. Enable this field to include the RF management information in the configuration that the switch pushes to its peers. To view the channel and power settings on the local switch, click the WLAN > Administration > AP Management > RF Management tab. Enable this field to include the AP Database in the configuration that the switch pushes to its peers. To view the contents of the local AP Database, click the WLAN > Administration > Basic Setup > Valid AP tab. Document 34CSFP6XXUWS-SWUM100-D7 Configuring Advanced Settings Page 523