D-Link DWS-4026 Product Manual - Page 465

Software User Manual 12/10/09 D-Link Unified Access System Field Configuration Status Configuration Failure Error Message Configuration Failure Element Vendor ID Part Number Hardware Type Managing Switch Switch MAC Address Switch IP Address Profile Discovery Reason Protocol Version Authenticated Clients System Up Time Age Table 283: Detailed Managed Access Point Status (Cont.) Description Indicates whether the AP is configured successfully with the assigned profile. The status is one of the following: • Not Configured: The profile has not been sent to the AP yet, the AP may be discovered but not yet authenticated. • In Progress: The switch is currently sending the AP profile configuration packet to the AP. • Success: The entire profile has been sent to the AP and there were no configuration errors. • Partial Success: The entire profile has been sent to the AP and there were configuration errors, but the AP is operational. • Failure: The profile has been sent to the AP and there were configuration errors, the AP is not operational. This field appears if the configuration status indicates a partial or complete failure. The field provides information about the last element that failed during configuration. The field shows an ASCII string filled in by the AP containing the error message for the last failing configuration element. I This field appears if the configuration status indicates a partial success or failure. It shows the element ID of the last failing configuration element. Vendor of the AP software, this is learned from the AP during discovery. Hardware part number for the AP, which is learned from the AP during discovery. Hardware platform for the AP, which is learned from the AP during discovery. Indicates whether the AP is managed by the local switch or a peer switch. Identifies the MAC address of the switch that is managing the AP. Identifies the IP address of the switch that is managing the AP. The AP profile configuration currently applied to the managed AP, the profile is assigned to the AP in the valid AP database. Note: Once an AP is discovered and managed by the Unified Switch, if the profile is changed in the valid AP database (either locally or on the RADIUS server) the AP must be reset to configure with the new profile. This status value indicates how the managed AP was discovered, the status is one of the following values: • IP Poll Received: The AP was discovered via an IP poll from the Unified Switch, its IP address is configured in the IP polling list. • Peer Redirect: The AP was discovered through a peer switch redirect, the AP tried to associate with another peer switch and learned the current Unified Switch IP address from the peer (peer learned Unified Switch IP address in RADIUS server response when validating the AP). • Switch IP Configured: The managed AP is configured with the Unified Switch IP address. • Switch IP DHCP: The managed AP learned the current DWL-8600AP IP address through DHCP option 43. • L2 Poll Received: The AP was discovered through the D-Link Wireless Device Discovery protocol. Indicates the protocol version supported by the software on the AP, which is learned from the AP during discovery. Total number of clients currently associated to the AP that have been authenticated. This is the sum of all authenticated clients for all the VAPs enabled on the AP. Time in seconds since last power-on reset of the managed AP. Time since last communication between the Unified Switch and the AP. Document 34CSFP6XXUWS-SWUM100-D7 Monitoring Status and Statistics Page 465