D-Link DWS-4026 Product Manual - Page 490

D-Link Unified Access System Software User Manual 12/10/09 Button Delete All Manage Acknowledge Acknowledge All Rogues Refresh Table 313: RF Scan Buttons Description Clears all APs from the RF scan list. The list repopulates as the APs are discovered. To configure a Rogue AP to be managed by the switch the next time it is discovered, select the check box next to the MAC address of a detected AP and click Manage. The switch adds the AP to the Valid AP database as a Managed AP and assigns it the default AP profile. Then, you can use the switch to configure the AP settings. If you use a RADIUS server for AP validation, you must add the MAC address of the AP to the AP database on the RADIUS server. To clear the rogue status of an AP in the RF Scan database, select the check box next to the MAC address of the AP and click Acknowledge. To acknowledge all APs with a Rogue status, click Acknowledge All Rogues. The status of an acknowledged rogue is returned to the status it had when it was first detected. If the detected AP fails any of the tests that classify it as a threat, it will be listed as a Rogue again. Update the page with the current data. After you click the MAC address of an AP to view details, the detailed Access Point RF Scan Status page for the AP appears. The detailed status for access points detected during the RF scan shows information about an individual AP detected through the RF scan. To view information about another AP detected through the RF Scan, return to the main Rogue/RF Scan page and click the MAC address of the AP with the information to view. Figure 337: RF Scan AP Details Table 314 shows the information the Access Point RF Scan Status page shows for an individual access point. Page 490 Monitoring and Managing Intrusion Detection Document 34CSFP6XXUWS-SWUM100-D7