D-Link DWS-4026 Product Manual - Page 240

D-Link Unified Access System Software User Manual 12/10/09 PORT CHANNEL STATUS Use the Port Channel Status page to group one or more full duplex Ethernet links to be aggregated together to form a portchannel, which is also known as a link aggregation group (LAG). The switch can treat the port-channel as if it were a single link. To access the Port Channel Status page, click LAN > Monitoring > Trunking > Status in the navigation tree. Field Port Channel Port Channel Name Port Channel Type Admin Mode Link State STP Mode Static Mode Link Trap Configured Ports Active Ports Figure 161: Port Channel Status Table 144: Port Channel Status Fields Description Identifies the port channel with the Slot/Port interface naming convention. Identifies the user-configured text name of the port channel. The type of this Port Channel, which is one of the following: • Static: The port channel is statically maintained. • Dynamic: The port channel is dynamically maintained. Select enable or disable from the pulldown menu. When the Port Channel is disabled no traffic will flow and LACPDUs will be dropped, but the links that form the Port Channel will not be released. The factory default is enable. Indicates whether the link is Up or Down. Shows whether the Spanning Tree Protocol (STP) Administrative Mode is enabled or disabled on the port channel Shows whether static mode is enabled for this port channel. Shows whether to send traps when link status changes. If the status is Enabled, traps are sent. Lists the ports that are members of the Port Channel, in Slot/Port notation. There can be a maximum of 8 ports assigned to a Port Channel. Lists the ports that are actively participating members of this Port Channel, in Slot/Port notation. Page 240 Creating Port Channels (Trunking) Document 34CSFP6XXUWS-SWUM100-D7