D-Link DWS-4026 Product Manual - Page 152

D-Link Unified Access System Software User Manual 12/10/09 MANAGING THE DHCP SERVER DHCP is generally used between clients (e.g., hosts) and servers (e.g., routers) for the purpose of assigning IP addresses, gateways, and other networking definitions such as DNS, NTP, and/or SIP parameters. The DHCP Server folder contains links to web pages that define and display DHCP parameters and data. The following pages are accessible from this DHCP Server folder: • "Global Configuration" • "Pool Configuration" • "Pool Options" • "Reset Configuration" • "DHCP Server Summary" • "Server Statistics" • "Conflicts Information" GLOBAL CONFIGURATION Use the Global Configuration page to configure DHCP global parameters. To display the page, click LAN > Administration > DHCP Server > Global Configuration in the navigation tree. Field Admin Mode Ping Packet Count Conflict Logging Mode Figure 84: DHCP Server Global Configuration Table 69: DHCP Server Global Configuration Fields Description Enables or disables DHCP server operation on the switch. The default value is Disable. Specifies the number of packets a server sends to a Pool address to check for duplication as part of a ping operation. Default value is 2. The valid range is (0, 2 to 10). Setting the value to 0 disables the function. Specifies whether to enable or disable conflict logging on a DHCP Server. The default value is Enable. Page 152 Managing the DHCP Server Document 34CSFP6XXUWS-SWUM100-D7