D-Link DWS-4026 Product Manual - Page 466

D-Link Unified Access System Software User Manual 12/10/09 Viewing Managed Access Point Radio Summary Information You can view general information about each operational radio on all APs managed by the switch. The Managed Access Point Radio Summary page shows the channel, transmit power, and number of associated wireless clients for all managed APs. For more information about a specific radio on an AP, click the radio. Table 284 describes the fields you see on the Radio Summary page for the managed access point status. Field MAC Address Location Radio Channel Transmit Power Authenticated Clients Table 284: Managed AP Radio Summary Description The Ethernet address of the Unified Switch managed AP. If the MAC address of the AP is followed by an asterisk (*), it is managed by a peer switch. A location description for the AP, this is the value configured in the valid AP database (either locally or on the RADIUS server). Indicates the radio interface and configured mode of the radio, if the radio is disabled the radio mode will be displayed as Off instead of showing the configured mode. If radio is operational, the current operating channel for the radio. If radio is operational, the current transmit power for the radio. Total count of clients authenticated by the AP on the physical radio. This is a sum of all the clients authenticated by each VAP enabled on the radio. Viewing Detailed Managed Access Point Radio Information You can view detailed information about each radio on the APs that the Unified Switch manages on the Radio Detail page for the managed access point radio status. Use the options above the table to select the AP and radio with the settings to view. The AP is identified by its MAC address and location. The radio is identified by its number and configured mode. If the radio is disabled, the radio mode will be displayed as Off. Table 285 describes the fields you see on the Radio Detail page for the managed access point status. Table 285: Managed AP Radio Detail Field Description Supported Channels Channel The list of eligible channels the AP reported to the switch for channel assignment. The list is based on country code, hardware capabilities, and any configured channel limitations. If radio is operational, the current operating channel for the radio. Channel Bandwidth Indicates whether the channel bandwidth is 20 MHz or 40 MHz. Fixed Channel Indicator This flag indicates if a fixed channel is configured and assigned to the radio, a fixed channel can be configured in the valid AP database (locally or on a RADIUS server). Manual Channel Adjustment Status Indicates the current state of a manual request to change the channel on this radio. The valid values are: • Not Started: No request has been made to change the channel. • Requested: A channel change has been requested by the user but has not been processed by the switch. • In Progress: The switch is processing a channel change request for this radio. • Success: A channel change request is complete. • Failure: A channel change request failed. WLAN Utilization Total network utilization for the physical radio. This value is based on radio statistics. Page 466 Monitoring Status and Statistics Document 34CSFP6XXUWS-SWUM100-D7