D-Link DWS-4026 Product Manual - Page 293

Software User Manual 12/10/09 D-Link Unified Access System CONFIGURING RIP RIP is an Interior Gateway Protocol (IGP) based on the Bellman-Ford algorithm and targeted at smaller networks (network diameter no greater than 15 hops). The routing information is propagated in RIP update packets that are sent out both periodically and in the event of a network topology change. On receipt of a RIP update, depending on whether the specified route exists or does not exist in the route table, the router may modify, delete, or add the route to its route table. The L3 Features > RIP menu page contains links to the following web pages that configure and display RIP parameters and data: • "RIP Configuration" • "RIP Interface Summary" • "RIP Interface Configuration" • "RIP Interface Summary" • "RIP Route Redistribution Summary" RIP CONFIGURATION Use the RIP Configuration page to enable and configure or disable RIP in Global mode. To display the page, click LAN > L3 Features > RIP > Configuration in the navigation tree. Field RIP Admin Mode Figure 200: RIP Configuration Table 182: RIP Configuration Fields Description Select Enable or Disable from the dropdown menu. If you select Enable, RIP is enabled for the switch. The default is Disable. Document 34CSFP6XXUWS-SWUM100-D7 Configuring RIP Page 293